Characteristic
• Reflective bowl style appearance 
• The iconic "mailbox" shape and industrial design
• Reflective bowl with aura backlight (RGB)
• Dimming function reduces brightness and power consumption
•LED and hernia bubble modes can be accessed through the menu
Switch with DMX
• Using the original Atomic color system makes internal power and digital supply easier. 
• 4-key menu and LCD display for faster settings
• Intelligent hanging and installation accessory solution
• Same 4-channel DMA mode as Atomic 3000 (easy to replace)
• 14 channel extended DMA mode, Aura backlight control and built-in macro effects
• RDM compatible, USB interface software upgrade
Specifications
Physical properties
L： 245 mm (9.7 ins.)
W： 425 mm (16.8 ins.)
H： 240 mm (9.5 ins.)
Weight： 7.8 kg (17.2 lbs.)
The above values are all inclusive of installation brackets
Dynamic effects
Strobe： 0.289 - 16.667 Hz，blink rate, intensity, and duration
Special effects: glare light, alternating oblique rise and fall, random flashing, illumination
Peak, pre programmed FX
Halo (secondary LED array illumination) color mixing: RGB
Control and Programming 
Control system: DMX,RDM
DMX channel:3/4/14
Settings and Addressing: Control Panel with Backlit Monochrome Graphics Display 
DMX protocol:  USITT DMX512-A
RDM protocol: ANSI/ESTA E1.20 RDM
Transceiver: RS-485
Firmware update: USB drive or via DMA (requires Martin) ™  M-DMA interface)
Optical characteristics and photometric data
Maximum total output: 180000 lm*
Beam (strobe) array
Light source: 228 Cree XLamp XP-L, 10 W white LED (color temperature 5700 K)
Group control: 8 Bit
Dimming, above 16.7% output intensity: current control, no flicker
Dimming, lower than 16.7% Output intensity: PWM (Refresh rate 6000 Hz)
LED minimum lifetime: 50000 hours**
*To learn all the photometric data, please click on the photometric data in the menu bar
**For outputs>70%, this value is determined based on the manufacturer's testing conditions
Structure
Color: Black
Shell: Steel impact resistant thermoplastic material, flame retardant thermal performance meets UL 94 5VA
Protection level: IP20
Install

Installation method: Two pairs of quick fixing points with M12 hole bolt holes on the adjustable bracket
Installation direction: unlimited
Minimum distance to flammable materials: 200 mm (8 inches) from the lamp
The shortest distance from the illuminated surface: 1 m (3 feet 4 inches) from the lamp
Applicable location: For indoor use only, it must be fixed on the surface or structure
Power connection
AC power supply: Neutrik PowerCON TRUE1 male slot
DMA data input/output: 5-pin locked XLR
Atomic Colors Color gel Scroll: 4-pin locked XLR
Software upload: USB 2.0
Electrical characteristics
AC power supply: 100-240 V (nominal), 50/60 Hz
Power supply unit: adaptive electronic switch mode
Maximum power consumption: 740 W
Rated current consumption: 3.5-8.4 A
Peak current consumption: 17.7 A
Standard half cycle RMS surge current: 17.7 A
Standard power and current
100 V, 60 Hz： 663 W, 6.8 A, PF 0.98
120 V, 60 Hz： 655 W, 5.7 A, PF 0.96
208 V, 60 Hz： 645 W, 3.5 A, PF 0.89
230 V, 50 Hz： 642 W, 3.2 A, PF 0.88
240 V, 50 Hz： 642 W, 3.1 A, PF 0.87
The standard power and current are the values measured when the flicker brightness of all LED reaches its maximum at nominal voltage. A deviation of+/-10% is allowed. Allow peak current exceeding these values (when using flash effect) PF=power factor.
Thermal Characteristic
Cooling method: forced air cooling (adjustable temperature, low noise, and user-defined fan settings)
Maximum ambient temperature (Ta max.): 40 ° C (104 ° F)
Standard heat dissipation (calculated value+/-10%): 2270 BTU/hour